Insert: Zaklínač Dobrodružná hra (INS19)
Code: INS19-1.gif?6526949e)

Related products
Igelitová taška s vyztuženým průhmatem a skládaným dnem. Nosnost max 10 kg.
Batoh od firmy Sapphire je skvělý na jakékoliv přenášení, uskladnění a ochranu deskových her. Do batohu lze uložit až 7 velkých her (o běžných rozměrech 30 x 30 x 7 cm), ke kterým se snadno dostanete skrze plně otvíratelnou přední kapsu.
Obaly na karty od firmy Sapphire pojmou karty do rozměru až 64 x 89 mm a jsou určeny na karty ze sběratelských a LCG her. Tyto obaly jsou o 50% pevnější než běžné obaly např. Ultra Pro Economy nebo Blackfire.
Batoh od firmy Grimlord Games je skvělý na jakékoliv přenášení, uskladnění a ochranu deskových her. Lze do něho uložit až 6 velkých her (o rozměrech 30 x 30 x 7,5 cm).
Vysoce kvalitní obaly na karty od firmy Arcane Tinmen jsou určeny na karty až do rozměru 63 x 88 mm, např. sběratelských a LCG her či jiných deskových her s tímto standardním rozměrem. Tyto obaly jsou dvakrát pevnější než běžné obaly např. Ultra Pro Economy nebo Blackfire, a dokonce o 30% pevnější než obaly Sapphire Green.
Vysoce kvalitní obaly na karty od firmy Arcane Tinmen jsou určeny na karty až do rozměru 57x89mm. Tyto obaly jsou dvakrát pevnější než běžné obaly např. Ultra Pro Economy nebo Blackfire, a dokonce o 30% pevnější než obaly Sapphire Green.
Vysoce kvalitní obaly na karty od firmy Arcane Tinmen jsou určeny na karty až do rozměru 41x63mm. Tyto obaly jsou dvakrát pevnější než běžné obaly např. Ultra Pro Economy nebo Blackfire, a dokonce o 30% pevnější než obaly Sapphire Green.
Compatible with Inis Third Edition (2016) or Inisi: Legendary Edition (2025) Supports Seasons of Inis, Nemed, Metal Coins, and Metal Tokens expansions Supports official card sleeves or other sleeves with a thickness of 100 microns (FFG, Mayday, Diamond, Paladin, Board Game Sleeves, etc.)
Product detailed description
Insert The Witcher Adventure Game + 3 additional characters + Black Monsters is your must-have accessory designed to organize and enhance the game experience.
Insert has been tested on sleeved cards! Yes, the insert can fit sleeves from our publisher TLAMA games!
Thanks to our insert you can arrange all game components and sleeved cards to keep them in order – no more mess on the table while playing. No more looking for necessary elements during the game.
Moreover, when the box is closed, the components are still kept in order, ready for setting another game faster than ever!
The insert is durable and made of PLA. To assemble it, there is no glue required. It allows you to hold, even when stored sideways! Everything fits inside the basic game box. The lid of the game box does not lift off.
Insert Introduction:
Additional parameters
| Category: | Accessories |
|---|---|
| Weight: | 0.4 kg |
| EAN: | 8595733700027 |
| ? 1. Core Game / Expansion: | Accessory |
| Box Closure: | Yes |
| Colour: | Mettalic Black |
| Material: | Plastic |
| Sleeved Cards: | 90 µm |
| Vertical Storage: | Yes |
| Rozměry insertu: | 285×285 mm |
Printed using a 3D printer, the insert is designed to make all the components fit perfectly, but also easy to remove. Additionally, this insert is designed to fit wrapped cards as well. It speeds up preparation, harvesting (by a few minutes) but also the flow of the game and allows for safer storage of game components. This is not an officially licensed product. The dimensions of the insert...
Organizér z paměťové pěny Evacore o tloušťce 5 mm. Kompatibilní s: Mansions of Madness 2nd Edition (Panství hrůzy), a Beyond the Threshold, Streets of Arkham, Sanctum of Twilight (Svatyně soumraku) a Horrific Journeys
Step into the suffocating heat of Pesadilla Verde, a forgotten jungle where the air itself feels alive - and hungry. Little do they know that they are being tracked by the Volk’ar, a cunning otherworldly predator who hunts for sport and can vanish at will. Unlike other killers, the Volk’ar doesn’t rush its prey - she studies, toys, and learns. You must track her through the dense foliage and...
Compatible 3D insert for the board game Orichalcum The insert is printed using a 3D printer and is designed so that all the components fit perfectly, but are also easy to remove. In addition, this insert is also designed for wrapped cards. It speeds up preparation but also the flow of the game and allows for safer storage of game components. This is not an officially licensed product.
Organizér z paměťové pěny Evacore o tloušťce 5 mm. Kompatibilní s: Nemesis
Compatible insert with the game: Galaxy Trucker: Second Edition + 2 expansions The insert is printed using a 3D printer and is designed so that all components fit perfectly but are also easy to remove. It speeds up setup, cleanup (by several minutes), and gameplay, and allows for safer storage of game components. This is not an officially licensed product.
The insert is designed for the base game Aeon’s End. The insert has been tested with sleeved cards! Yes, the insert can even fit card sleeves from our publisher TLAMA games! Thanks to the insert, you can organize all game components and cards in sleeves to keep them tidy – no more mess on the table while playing. No more searching for the necessary elements during the game.



